General size (adult): 8 "(L) x 1/2" (W) x 1/16"(H) or (202MM x 12MM x 2MM)
Women"s size (adult): 7.5 "(L) x 1/2" (W) x 1/16"(H) or 190 MM x 12MM x 2MM)
General size (children): 7 "(L) x 1/2" (W) x 1/16"(H) or (180MM x 12MM x 2MM)
61/2 "(L) x 1/2" (W) x 1/16"(H) or (165MM x 12MM x 2MM)
The maximum screen printed and engraving area for adults is 7.677"X 0.334"
The maximum area of screen printing and engraving for children is 7.00"X 0.334"
As for width, commonly used are:
1/4 "or 6MM
1/2 "or 12MM
3/5 "or 15MM
3/4 "or 19MM
1 "or 25MM
bracelet-silicone-personnalise-montrealembossed-wristbands owing and individual pack. The most importantly it shows what the bracelet looks like with your message or logo. It is direct way to check if wording, colors of bracelet and logo are correct.
Make the mould or film. A mould is needed for debossed, embossed, colorfilled styles. We make a mould and set it in the machine, the high temperature of about 200℃ will solidify rubber into the sharp of bracelet. A mould is made from copper.
A film is functioned like a mould but it is for printed wristband only. It transfer the ink to the surface of bracelet as logo and wording.
Prepare the rubber material. A rubber bracelet is mainly made from silicone rubber, and some other accessories like curing agent which solidify the soft rubber, and Color masterbatch which makes bracelet colored.
We will mix these material evenly in a blender. It comes out a ball of rubber. We need to measure it into blocks of almost same weight which as much as the weight of a wristband. Normal size of 202*12mm bracelet is weighted about 6g.
Produce bracelets by the mould. As we mentioned before in 2nd and 3rd step, we will transfer the blocks to bracelets by a set of moulding machine of high temperature. When it cool down, it gets the characteristic of a bracelet, smooth and strengthened.
Edge cutting. A semi-product of rubber bracelet has rough edges, we have to cut it off. The rough edge is cut by machine. It will be good.
Color the logo and wording. The bracelet comes out from moulding machine without colors on the logo and lettering. We have to fill the ink or print the ink on the bracelet. Different style has different way of printing.
Clean the product. As the brhow to emboss silicone wristbandsacelet has static electricity, dust will be on the surface and hard to move off. So we need to clean the bracelet before packing. We usually wash it with water once.
After washing, we will check the quality.
Packing and delivery.Wehow to emboss silicone wristbands count the quantity by weighting. Normally packing will be 100pcs/bag, and 2500pcs/ctn. Individual packing is available.
(W) x 1/16"(H) or (165MM x 12MM x 2MM)
White: make poverty history
Nike: stand up talk up (anti-racial discrimination)
BBC radio: Beat bullying
Pink (BCC): support knowledge strength (to support breast cancer patients)
BHF: Feel the pulse
Dark Blue/Blue White: one world one cause/tsunami Relief (to help tsunami victims)
Blue + Green: say no to sectarianism
silicone wristband bracelet with various fluorescence, night light and colors are soft, non-deformable, non-toxic, wear-resistant, non-cracking, high temperature resistance, long service life, non-irritating skin, fashionable and so on. Besides decorative function, it can also play the role of medical treatment, health care and mosquito repellent.
silicone wristband bracelet are used in various entertainment venues and stadiums. They can be used as gifts, souvenirs, promotional products, etc. They are hot fashion jewelry. They are also a kind of low-cost advertising promotional gifts with high advertising efficiency. Most of the sport hand straps have no practical use, just a fashion accessory. This kind of handband usually reflects the beliefs and values of the wearer.