t to produce the printed wristband ,the first step ,we will make a digital proof depends on the order information and send it to customer to confirm it .If the digital proof is not ok ,we will revised it and send it to customer again .We will satrt the mass production until the customer confirm the digital proof .The second step ,we need to prepare silica gel and use the promotional machine to produce the blank wristband and trim the edge of the blank wristband .At the same time ,we need to produce the screen printing plate out and printed the logo and message on the band surface through it .When we finished the printing process ,we will put the printed wristband in oven to bake it .When the ink is dried ,the printed wristband is finished .About the logo and message color ,we can make it with one color ,two colors ,three colors of CMYK color .By the way ,if we want to peoduce the printed wristband ,the thickness of the line of the logo need to reach 0.1 mm ,otherwise the screen printing plate can’t be produce out .
After reading this article, I believe you have a general understanding of printed wristband .If you want to know more about the printed wristband ,please contact us when you feel free .
colored-rubber-bands-for-braceletscolor-filled-wristband silicone. Silicone is a bonded polymer substance with numerous elastomeric qualities carabiner keychainthat make it both flexible and water resistant. Originally created as an insulating material, silicone is also fairly heat resistant, but is usually susceptible to deterioration from UV exposure.
Silicone rubber stock is typically extruded into strips or tubes of varying thickness, which are then compression molded into the familiar round carabiner keychaincross-section of a bracelet. Color dyeing is usually a pre-molding process, but most companies have a range of different colors to choose from. The silicone bands display high levels of elasticity, allowing them to stretch over most wrists. As a result, the majority of these decorative wristbands are produced with a circumference between 7 and 8.5 inches. The width is usually half an inch, while thickness is approximately a tenth of an inch.